2012 Honda Fit
Mileage
92,842
Service Date
9/10/2021
Services Performed
- Changed Motor Oil & Replaced Filter, Lube Chassis, Check and top off all Fluid Levels, Inflated tires to proper pressure.
- WHEELS (ALL) – Rotate – [Includes: Adjust Tire air pressure and torque Wheels to factory specifications.]
- VALVE CLEARANCE – ADJUST – [Adjust only if noisy.] BRAKE HOSES & LINES – INSPECT – [Check the master cylinder and ABS/VSA modulator-control unit for damage or leakage.] DRIVESHAFT/PROPELLER SHAFT DUST BOOTS – INSPECT – [Check boots for cracks and boot bands for tightness.] EXHAUST SYSTEM – INSPECT – [Check catalytic converter heat shields, exhaust pipes, and muffler for damage, leaks, and tightness. NOTE: According to state and federal regulations, failure to do this maintenance item will not void the customer's emissions warranties. However, Honda recommends that all maintenance services be done at the recommended interval, to ensure long-term reliability.] FLUID & LUBRICANT LEVELS – INSPECT FRONT & REAR BRAKES – INSPECT – [Check pads and discs for wear (thickness), damage, and cracks. Check calipers for damage, leaks, and tightness of mounting bolts. Check wheel cylinders for leaks. Check brake linings for cracking, glazing, wear, or contamination.] FUEL LINES & CONNECTIONS – INSPECT – [Check for loose connections, cracks, and deterioration; retighten loose connections and replace damaged parts. NOTE: According to state and federal regulations, failure to do this maintenance item will not void the customer's emissions warranties. However, Honda recommends that all maintenance services be done at the recommended interval, to ensure long-term reliability.] PARKING BRAKE – INSPECT STEERING COMPONENTS – INSPECT – [Inspect tie rod ends, steering gearbox, and gear boots. Check steering linkage, check boots for damage and leaking grease.] SUSPENSION COMPONENTS – INSPECT – [Check bolts for tightness. Check condition of ball joint boots for deterioration and damage] ENGINE OIL – REPLACE ENGINE OIL FILTER – REPLACE MAINTENANCE MINDER LIGHT – RESET – [Reset the Maintenance Minder Light after every service is performed. If the Light is reset without performing a service, the system will not show the proper maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.]
- VALVE CLEARANCE – ADJUST – [Adjust only if noisy.] MAINTENANCE MINDER LIGHT – RESET – [Reset the Maintenance Minder Light after every service is performed. If the Light is reset without performing a service, the system will not show the proper maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.] TIRES – ROTATE
- VEHICLE INSPECTION
TRICIA P. gave our service a 5 star review on 9/10/2021
